Learn details.


  • This warranty applies to any individual purchaser’s personal vehicle on which the NANOTEK PPF is installed.
  • For the warranty to be valid, the purchaser must produce the original invoice stating the customer name, name of the installer, date of installation and the vehicle’s chassis number.
  • The film must be installed by a NANOTEK certified installer and a maintenance record must be presented.
  • The warranty will be void if the vehicle has not been maintained by a NANOTEK certified installer. The interval of maintenance shall not be less than once every 12 months.
  • The installation must be on the car’s original paint and maintenance requirements given on this page must be followed.
  • This warranty is not transferable. Warranty coverage is only applicable to the original purchaser of the product.
  • This warranty coverage definitely ends in case of selling or processing of the vehicle.


NANOTEK warrants it’s Paint Protection Films to be free of manufacturing defects for 6 years from the date of installation.

Covered defects include: delamination, bubbling, yellowing and cracking.


  • The blemishes of the installed film are not taken into account in this warranty. Only the NANOTEK film installer is responsible for this aspect of the product once installed. If, before installation, the professional notes a visual defect in the film or adhesive, it is his responsibility not to install it.
  • The installation by a private individual or a non-certified installer is excluded from this warranty.
  • Any damage on the substrate (including its recovery) are not warranted.
  • Any lifting of the film occurring within 14 days following the installation, due to vehicle cleaning carried out with any kind of detergent or any damage caused by an automatic or commercial car wash.
  • Scratches and all type of damage caused to the film after having been cleaned in a car wash.
  • Surface damage caused by accidents or vandalism.


Climatic effect: the degradation of materials is a natural and unavoidable phenomenon. A slight and progressive modification of the transparency and brightness, as well as a slight peeling off at the edges and around the rivets are normal phenomenon which do not fall within the scope of this warranty.

Self healing: the self-healing properties will diminish over time, due to wear and tear.


Caring for your Nanotek PPF is easy. Simply follow the steps below:


  • After film installation, wait one week before washing, waxing or driving your vehicle on the motorway or in rain, to help ensure proper adhesion of the film has been achieved.
  • If a high pressure washer is used, it should be kept at least 60cm away from the edge of the film. Edge peeling off as a result of high pressure washing will not be covered under the warranty.
  • Keep your vehicle clean and wash it at least once every 2 weeks and immediately after a rain.
  • Avoid dry dusting of your vehicle. This can result in deterioration of the self-healing ability of the film.
  • Grime build up on edges should be cleaned periodically using a clay bar.
  • A wax or spray sealant recommended by the installer should be applied at least every 2 months.
  • Use waxes that do not contain dyes, abrasive polishes and/or rubbing compounds.
  • Do not use automatic or commercial car washes.
  • After waxing your car, you can remove any wax build-up along film edges with a lint-free cloth.
  • Follow the maintenance schedule given by your installer.